Tubeway manufacture and stock a selection of PVC scotia and quadrant mouldings, which can be used for concealing cables, as decorative coving or edging and as covers for expansion gaps on floor edges. The PVC quadrant profiles come either as solid or hollow, and are convex, whilst the Scotia moulding is concave.
We can provide plastic scotia and quadrant in different ways:
- from the stock range shown,
- from a production run of 500m+ using existing stock tooling,
- from new tooling, made to your measurement.
To discuss these or anything else, contact us with your Plastic Scotia or Plastic Quadrant requirements.
PLASTIC SCOTIA MOULDING
|COLOURS||PACK SIZE||£ ex Vat|
|50mm Plastic Scotia Moulding
||6 x 2.44m
|25mm Plastic Scotia Moulding
|12 x 2.44m
12 x 2.44m
|12.5mm Plastic Scotia Moulding
||12 x 2.44m
PLASTIC HOLLOW QUADRANT
PLASTIC SOLID QUADRANT
PLASTIC SCOTIA and PLASTIC QUADRANT- Made To Order
If you have a small requirement for these products, then stock packs may be sufficient. If you need hundreds of metres, however, a production run is likely to be more cost effective than buying from stock. This also allows the scotia or quadrant profiles to be produced to non-standard lengths, and be run in either one of our many standard colours, or a specific colour match.
The design of Scotia and Quadrant, usually used as an edging or beading, can allow for cables to be run through the hollow back section, which is designed to fit a 90 degree wall / floor or wall / shelf junction. Tubeway can cut tooling for larger profiles of the same basic design for the Scotia and Hollow Quadrant, although the Solid Quadrant is limited by its thickness to the stock size shown above.
To discuss options on your production requirement, such as the addition of Double Sided Tape, please contact us with your Plastic Scotia or Plastic Quadrant enquiry and our Sales team will be pleased to help.