PLASTIC CORNER PROFILE - From Stock

Tubeway manufacture and stock different styles of plastic corner joint for 90 degree and other sized angle jointing. For 3mm panels, such as plywood, glass and foamex, which are used extensively in the exhibition industry, there are internal and external plastic 90 degree corner strips. For larger panels and wallboards, in the 12mm-19mm range, there are plastic L section and rounded plastic corner joints which the design allows to flex slightly above and below 90 degrees.

We can supply plastic corner section in these ways:

  • packs from our stock range, as shown below,
  • from a production run of 500m+ using a stock corner section tool,
  • from a production run using one of the plastic corner joint tools listed further down,
  • from a new tool, cut to the shape and size you need.
For more information on this, or to discuss your full requirements, please contact us with your Plastic Corner Section requirements.

If you need other plastic profiles that complement our plastic corner sections, you can click through to our clip on edging, plastic capping, plastic T sections and plastic H sections pages.

INTERNAL PLASTIC CORNER JOINT

plastic corner section for 3mm panels
PRODUCT DIMENSIONS (mm)*
A B C
COLOURS PACK SIZE £ ex Vat
3mm Internal Plastic Corner
ER064X
3.9 18 1.7
Black, White 12 x 2.54m 41.60
Buy internal and external corner joints online from Tubeway Sales

EXTERNAL PLASTIC CORNER JOINTS

plastic corner sections for 3mm and 12mm boards
PRODUCT DIMENSIONS (mm)*
A B C
COLOURS PACK SIZE £ ex Vat
12mm External Plastic Corner
ER134XX
12 21 1.2
White
Vanilla
10 x 3m
10 x 3m
49.40
55.20
3mm External Plastic Corner
ER065X
3.9 11.5 1.5
Black, White 12 x 2.54m 41.60
Buy internal and external corner joints online from Tubeway Sales

16mm - 19mm PLASTIC L SECTIONS

plastic L section for wallboard jointing
PRODUCT DIMENSIONS (mm)*
A B C D
COLOURS PACK SIZE £ ex Vat
19mm Plastic L Section
ER102XX
19 17.5 21.9 1.5
Black, White
Teak, Lt Grey, Vanilla
12 x 2.44m / 10 x 3m
12 x 2.44m
61.00
67.00
16mm Plastic L Section
ER092XX
16 14.5 19.4 1.5
Black
White
Teak, Lt Grey, Vanilla
12 x 2.44m
12 x 2.44m / 10 x 3m
12 x 2.44m
54.40
52.20
59.80
Buy l section square corners online from Tubeway Sales

16mm - 19mm PLASTIC CORNER SECTIONS

plastic corner section for wallboard jointing
PRODUCT DIMENSIONS (mm)*
A B C D
COLOURS PACK SIZE £ ex Vat
19mm Round Plastic Corner Joint
ER099XX
19 17.3 19 1.5
Black, White
Vanilla
5 x 3m
5 x 3m
52.60
57.80
16mm Round Plastic Corner Joint
ER096XX
16.2 14.5 11 1.5
Black, White
Vanilla
6 x 2.44m
6 x 2.44m
43.20
47.40
Buy round corner section online from Tubeway Sales

*Measurements are for guidance only, as minor variations can occur in the manufacture of plastic products. If dimensions are critical please contact our Sales team.

plastic l section £50 minimum order
plastic l section from stock on next day delivery
plastic corner section discounted for bulk purchase
pay for your plastic corner section by card on the phone
plastic corner joints carriage guidelines
plastic 90 degree production runs available

PLASTIC CORNER SECTION - Made To Order


If your plastic corner section requirement is modest, then a stock pack or two may be enough. However, for large quantities, a production run is possible rather than buying many stock packs. This can work out more cost effective, allow the corner section to be cut to specific lengths, and be made from one of our standard colours or a colour match.

We hope you find something suitable for your uses, but please remember that we can cut new tooling if required, for 90 degree corners but also for other angled joints.

For more information on any product featured, or queries about the manufacture or use of Plastic Corner Sections, please contact our Sales team.

PRODUCTION INTERNAL CORNER SECTION

corner section for angled board jointing
REFERENCE DIMENSIONS (mm)*
A B C
COMMENTS
0684PX
2 17 1.4
90 degree
0680PX
2.2 10 1
135 degree
0683PX
3 17 1.4
90 degree
0681PX
4.4 19.5 1.4
90 degree
0682PX
20 24 -
135 degree

*Measurements are for guidance only, as minor variations can occur in the manufacture of plastic products. If dimensions are critical please contact our Sales team.

plastic corner section £200 minimum production order
pvc corner section tooling made to order
plastic corner sections made in the UK
plastic corner section prompt lead times
choice of plastic corner section lengths and colour
cost effective plastic corner section sample runs