Tubeway manufacture and stock a range of edgings in rigid and flexible PVC suitable for furniture edge protection. These come in two styles:
FLAT PVC EDGING
Supplied as either flexible or rigid PVC edging, the Flat Half Round profile has the bottom two corners 90 degree square, and the top two rounded for a pleasing tactile finish. Suitable for straight or curved surfaces, they can be bonded in place.
RIGID LIPPED/HOCKEY STICK EDGING
Designed with a small lip to encompass the top edge of a worktop or desk and prevent chipping to a finish or veneer. These lipped pvc edgings are suitable only for flat or gently curved surfaces.
If you are looking for a thicker flat plastic profile, click through for our Plastic Flat Bar page. Otherwise we can supply plastic Flat Edgings in different ways:
- from stock, as below,
- from a production run (usually 1000m+ for smaller profiles) with a stock Edging tool,
- from a production run with one of the production tools listed further down,
- from a new tool, cut to the exact style and specification you need.
To discuss any enquiry in detail, please contact us with your Plastic Flat Edging requirements. We can also supply Aluminium Domed Feather Edging if required.
Stock Flat PVC Edging
Tubeway make these edgings at our UK factory, and carry stock as listed below. To buy online for quick despatch and delivery, follow the links in each table, where you can also order from our extensive range of double sided tapes, which are often suitable for the installation of flat rigid edgings.
FLAT RIGID PVC EDGING
Please Note - Tubeway supply complete packs as detailed the table above, subject to a £50 goods value minimum, plus delivery and Vat.
FLAT FLEXIBLE PVC EDGING
LIPPED RIGID PVC EDGING
HOCKEY STICK PVC EDGING
*Measurements are for guidance only, as minor variations can occur in the manufacture of plastic products. If dimensions are critical please contact our Sales team.
Production Flat PVC Edging
When your requirement for plastic Flat Edgings is into hundreds of metres, stock packs may not be the most efficient way of supplying - a production run can work out better value, and give you the flexibility of non-standard lengths, a specific colour match or using one of our many standard colours.
We hope you find what you want from the stock tools above or the additional tooling below, but please remember that we can make new tooling quickly and cheaply should it be more suitable.
Flat Edgings can be run in rigid or flexible PVC, from any of the tools detailed. This is particularly effective for the “two dimensional” profiles, such as the Flat Half Round, as they will easily accommodate curved surfaces without the rippling or stretching you would expect from a three dimensional section.
For more information on flexible PVC, or any queries about the manufacture or use of Tubeway’s Plastic Flat Edging, please contact our Sales team for assistance.
PRODUCTION FLAT EDGING
REFERENCE |
DIMENSIONS (mm)*
|
MINIMUM
ORDER QTY |
COMMENTS |
0009PX |
|
1000m |
Order stock here |
0480PX |
|
1000m |
All 4 corners rounded |
0010PX |
|
1000m |
Order stock here |
0475PX |
|
500m |
Flat Half Round |
0011PX |
|
500m |
Order stock here |
0470PX |
|
500m |
Flat Half Round |
0471PX |
|
500m |
Flat Half Round |
0474PX |
|
500m |
Flat Half Round |
0472PX |
|
500m |
Flat Half Round |
0473PX |
|
500m |
Flat Half Round |
PRODUCTION LIPPED EDGING
PRODUCTION HOCKEY STICK EDGING
*Measurements are for guidance only, as minor variations can occur in the manufacture of plastic products. If dimensions are critical please contact our Sales team.